- Model NO.: copper mould tube
- Series: Casting Machine
- Materials: Tp2,etc
- Brand: China
- Origin: China
- Used for: Continuous Casting Machine
- Specification: as Drawing
- Size: as Requirements
- Trademark: none
- HS Code: 8454902900
|Copper plate size||Length||Width||Thickness||Material||Coating|
|Beam blank||700-1016||280-480||80-140||CuCrZr / CuAg||Ni_Co / Ni_Fe|
|Retangulur||700-1000||300-3800||30-65||CuCrZr / CuAg||Ni_Co / Ni_Fe|
At present, deoxidized phosphorus copper (TP2), Silver-bearing copper (CuAg0.1) and Cu-Cr-Zr are normally selected as the material to produce mould tubes.
Beam blank copper mould tubes
Square copper mould tubes
Rectangular copper mould tubes
Round copper mould tubes
1. Square & Rectangular copper tube
Item size: Square 50*50-500*500
Camber radius:4000-17000 Also straight
Length: 700- 1000
Remarks: With slot single taper, double taper, triple taper, quadruplicate taper, parabolic taper and various kinds of continuous taper high efficiency copper mould tube.
2. Round copper tube
Item size:Ø 110-Ø1200
Camber radius: 5000-17000 Also straight
Remark: With slot double taper, quadruplicate taper, parabolic taper and varius kinds of continuous taper high efficiency copper mould tubes.
3. Non-standard copper mould tubes/Beam blank copper mould tubes
Remark: With slot single taper, double taper, triple taper, quadruplicate teper.
1. Stable rolled strip profits
2. Good surface quality
3. High dimension accuracy
4. Good wear resistance
We specialize in exporting different kinds of mill rolls, such as follows:
1)CAST IRON ROLLS
Alloy Chilled Cast Iron Rolls
Alloy Indefinite Chilled Cast Iron Rolls
Pearlitic Nodular Cast Iron Rolls(Centrifugal)
Spiculate Bainitic Nodular Cast Iron Rolls(Centrifugal)
Alloy Nodular Cast Iron Rolls(Centrifugal)
2)CAST STEEL ROLLS
Alloy Cast Steel Rolls
Adamite Steel Rolls
Graphite Steel Rolls
High Speed Steel Rolls
They are mainly applied to finishing mill, hot&cold rolling mill work rolls, back-up rolls. Adamite roll or high speed steel roll used in the early finishing stands of a lot strip mill.
1)Material: Alloy Steel, Alloy Iron, Ductile Iron and so on
2)Size: According to clients' drawing
3)Standard: GB, AISI, SAE, ASTM/ASME
4)Hardness: According to clients' demand
5)Chemical Composition: According to Clients'demand.
6)Inspection: Ultrasonic Inspection, Microstructure Test
7)Packaging: Steel Frame
8)Payment: T/T or L/C
Our products are high in quality and reasonable in price. We can guarantee their quality
We can supply all kinds of Work Roll.
We hope to establish longtime cooperate relationship.
If you are interesred in our produccts,
Plese contact me without hesitate.